Ubuntu 14.04 (Trusty Tahr) problems: Logitech Media Server died. Restarting.

[martinlittle]

Hi

I've been happily running LMS on my Ubuntu box (13.10). Trying the new
14.04, I'm seeing the old favourite message 'Logitech Media Server died.
Restarting.'. Does anyone have it running successfully on 14.04? My
searches of the forum and Google didn't yield anything of use.

Cheers
Martin


------------------------------------------------------------------------
martinlittle's Profile: http://forums.slimdevices.com/member.php?userid=35518
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[Michael Herger]

Post by martinlittle
I've been happily running LMS on my Ubuntu box (13.10). Trying the new
14.04, I'm seeing the old favourite message 'Logitech Media Server died.
Restarting.'. Does anyone have it running successfully on 14.04? My
searches of the forum and Google didn't yield anything of use.

Most likely an unsupported perl. What version string would you get with
perl -v? What LMS version are you running?

[Mark Fraser]

Post by Michael Herger

Post by martinlittle
I've been happily running LMS on my Ubuntu box (13.10). Trying the new
14.04, I'm seeing the old favourite message 'Logitech Media Server died.
Restarting.'. Does anyone have it running successfully on 14.04? My
searches of the forum and Google didn't yield anything of use.

Most likely an unsupported perl. What version string would you get with
perl -v? What LMS version are you running?

Not yet running LMS on 14.04, but I do have a machine running 14.04. The
output of perl -v is:

This is perl 5, version 18, subversion 2 (v5.18.2) built for x86_64-linux-gnu-
thread-multi

[Michael Herger]

Post by Mark Fraser
This is perl 5, version 18, subversion 2 (v5.18.2) built for x86_64-linux-gnu-
thread-multi

Yeah, that's still missing from 7.7. But LMS 7.8 should be fine. Please
give it a try.

[martinlittle]

Post by Michael Herger
Yeah, that's still missing from 7.7. But LMS 7.8 should be fine. Please
give it a try.

Thanks for the idea. Am I correct in taking 7.8 from here:
http://downloads.slimdevices.com/nightly/?ver=7.8 ?


------------------------------------------------------------------------
martinlittle's Profile: http://forums.slimdevices.com/member.php?userid=35518
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[Michael Herger]

Post by martinlittle
http://downloads.slimdevices.com/nightly/?ver=7.8 ?

Yes

[SlimChances]

I installed 14.04 64 bit on a USB stck (full install not Live) and
installed LMS 7.8. Worked fine for me



Logitech Media Server Version: 7.8.0 - 1386246861 @ Fri Dec 6 19:06:27
PST 2013
Operating system: Debian - EN - utf8
Platform Architecture: x86_64-linux
Perl Version: 5.14.2 - x86_64-linux-gnu-thread-multi
Database Version: DBD::SQLite 1.34_01 (sqlite 3.7.7.1)
One SB Touch connected by ethernet - Denon AVR -1912 Receiver, Paradigm
4.1 speakers
One SB Boom wireless
One SB Radio wireless
------------------------------------------------------------------------
SlimChances's Profile: http://forums.slimdevices.com/member.php?userid=165
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[martinlittle]

Hmm, still getting the same error. I did remove 7.7 first, then
installed 7.8 using dpkg.

Just tried running it from /usr/sbin/squeezeboxserver , and I get this

If you're running some unsupported Linux/Unix platform, please use the
buildme.sh
https://github.com/Logitech/slimserver-vendor/tree/public/7.8/CPAN
If 7.8 is outdated by the time you read this, Replace "7.8" with the
major version
You should never need to do this if you're on Windows or Mac OSX. If the
installers
don't work for you, ask for help and/or report a bug.
*******
Exiting..

Does this look like a likely next step?
http://forums.slimdevices.com/showthread.php?88250-Perl-5-12-3-and-sqeezeboxserver-a-solution


------------------------------------------------------------------------
martinlittle's Profile: http://forums.slimdevices.com/member.php?userid=35518
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[SlimChances]

I am able to run 14.04 and LMS 7.8 with a normal deb install (I did no
manual compiling), My version of 14.04 is dated Feb 27th when beta 1
freeze ocurred and I have made no special modiifications other than
installing Cinnamon DE. The software update is calling for a 220 MB
upgrade but I don't want to try it as it will take forever to install on
my USB stick so I don't have the latest version of 14.04

Logitech Media Server Version: 7.8.0 - 1385715836 @ Fri Nov 29 02:23:56
PST 2013





Server HTTP Port Number: 9000
Operating system: Debian - EN - utf8
Platform Architecture: x86_64-linux
Perl Version: 5.18.2 - x86_64-linux-gnu-thread-multi
Database Version: DBD::SQLite 1.34_01 (sqlite 3.7.7.1)
Total Players Recognized: 1



Logitech Media Server Version: 7.8.0 - 1386246861 @ Fri Dec 6 19:06:27
PST 2013
Operating system: Debian - EN - utf8
Platform Architecture: x86_64-linux
Perl Version: 5.14.2 - x86_64-linux-gnu-thread-multi
Database Version: DBD::SQLite 1.34_01 (sqlite 3.7.7.1)
One SB Touch connected by ethernet - Denon AVR -1912 Receiver, Paradigm
4.1 speakers
One SB Boom wireless
One SB Radio wireless
------------------------------------------------------------------------
SlimChances's Profile: http://forums.slimdevices.com/member.php?userid=165
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[plopix]

Post by Michael Herger

Post by martinlittle
http://downloads.slimdevices.com/nightly/?ver=7.8 ?

Yes
--
Michael

squeezeboxserver isn't starting since I upgraded to -Ubuntu Trusty Tahr-
a couple of weeks ago. Today I tried to install 7.8.0~1394810410 and the
server process failes to start like in all recent builds I tried. What
else can I try to resolve this issue?

Code:
--------------------
# tail /var/log/squeezeboxserver/server.log
2014-03-16 14:45:16 squeezeboxserver_safe started.
2014-03-16 14:45:21 Logitech Media Server died. Restarting.
2014-03-16 14:45:26 Logitech Media Server died. Restarting.
2014-03-16 14:45:31 Logitech Media Server died. Restarting.
2014-03-16 14:45:36 Logitech Media Server died. Restarting.
2014-03-16 14:45:41 Logitech Media Server died. Restarting.
2014-03-16 14:45:46 Logitech Media Server died. Restarting.
2014-03-16 14:45:51 Logitech Media Server died. Restarting.
2014-03-16 14:45:56 Logitech Media Server died. Restarting.
2014-03-16 14:46:01 Logitech Media Server died. Restarting.

# /usr/sbin/squeezeboxserver
The following modules failed to load: DBI EV HTML::Parser JSON::XS Digest::SHA1 YAML::XS


*******

NOTE:

If you're running some unsupported Linux/Unix platform, please use the buildme.sh
script located here:

https://github.com/Logitech/slimserver-vendor/tree/public/7.8/CPAN

If 7.8 is outdated by the time you read this, Replace "7.8" with the major version
You should never need to do this if you're on Windows or Mac OSX. If the installers
don't work for you, ask for help and/or report a bug.

*******


Exiting..

# perl -V
Summary of my perl5 (revision 5 version 18 subversion 2) configuration:
[…]

# ls -l /var/cache/apt/archives/logitechm*
-rw-r--r-- 1 root root 113355106 Mar 7 04:14 /var/cache/apt/archives/logitechmediaserver_7.8.0~1394105286_all.deb
-rw-r--r-- 1 root root 113355396 Mar 8 04:14 /var/cache/apt/archives/logitechmediaserver_7.8.0~1394196562_all.deb
-rw-r--r-- 1 root root 113356086 Mar 16 04:14 /var/cache/apt/archives/logitechmediaserver_7.8.0~1394810410_all.deb

--------------------


------------------------------------------------------------------------
plopix's Profile: http://forums.slimdevices.com/member.php?userid=9717
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[Michael Herger]

Unfortunately you decided to remove about the most important part of

Post by plopix
# perl -V
[…]

What's there inside these brackets?

[mudlark]

my lms has also stopped working with kubuntu 14.04.



Transporter or Cyrus streamX>CyrusDACX>PreXvs>ESPAudio P09B Active
filter>Cyrus X x 2>Rhapsody, Avondale and Naim cable, Kubuntu 12.04
server, various boxes for storage.
SB3 Flycatcher 3A linear power supply.
Using SqueezeBox Server 7.5.2 testing
piCorePlayer
------------------------------------------------------------------------
mudlark's Profile: http://forums.slimdevices.com/member.php?userid=7151
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[SlimChances]

I will try Ubuntu final beta and LMS when it comes out next week



Logitech Media Server Version: 7.8.0 - 1386246861 @ Fri Dec 6 19:06:27
PST 2013
Operating system: Debian - EN - utf8
Platform Architecture: x86_64-linux
Perl Version: 5.14.2 - x86_64-linux-gnu-thread-multi
Database Version: DBD::SQLite 1.34_01 (sqlite 3.7.7.1)
One SB Touch connected by ethernet - Denon AVR -1912 Receiver, Paradigm
4.1 speakers
One SB Boom wireless
One SB Radio wireless
------------------------------------------------------------------------
SlimChances's Profile: http://forums.slimdevices.com/member.php?userid=165
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[mudlark]

Hi,

My server keeps dying.

014-03-20 06:52:13 Logitech Media Server died. Restarting.
2014-03-20 06:52:18 Logitech Media Server died. Restarting.
2014-03-20 06:52:18 Logitech Media Server died. Restarting.
2014-03-20 06:52:23 Logitech Media Server died. Restarting.
2014-03-20 06:52:23 Logitech Media Server died. Restarting.
2014-03-20 06:52:28 Logitech Media Server died. Restarting.
2014-03-20 06:52:28 Logitech Media Server died. Restarting.
2014-03-20 06:52:33 Logitech Media Server died. Restarting.
2014-03-20 06:52:33 Logitech Media Server died. Restarting.
2014-03-20 06:52:38 Logitech Media Server died. Restarting.
2014-03-20 06:52:38 Logitech Media Server died. Restarting.
2014-03-20 06:52:43 Logitech Media Server died. Restarting.
2014-03-20 06:52:43 Logitech Media Server died. Restarting.

Etc.

I'm running 14.04 beta and lms 7.8.

Are there any useful logs I can turn on from command line?

Thanks.



Transporter or Cyrus streamX>CyrusDACX>PreXvs>ESPAudio P09B Active
filter>Cyrus X x 2>Rhapsody, Avondale and Naim cable, Kubuntu 12.04
server, various boxes for storage.
SB3 Flycatcher 3A linear power supply.
Using SqueezeBoxServer (LMS) 7.8
piCorePlayer
------------------------------------------------------------------------
mudlark's Profile: http://forums.slimdevices.com/member.php?userid=7151
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[Michael Herger]

Installed 14.04 latest nightly build. Downloaded latest 7.8.0 LMS build.
Installed it. Done. Working flawlessly.

Please note that LMS 7.8 currently requires you to run Ubuntu (or
whatever other Perl 5.18 based Linux in x86_64 mode. 32-bit mode
currently is not supported.

[mudlark]

My machine is 32 bit. Does this mean I need to install a 64 bit version
or is there a work round?



Transporter or Cyrus streamX>CyrusDACX>PreXvs>ESPAudio P09B Active
filter>Cyrus X x 2>Rhapsody, Avondale and Naim cable, Kubuntu 12.04
server, various boxes for storage.
SB3 Flycatcher 3A linear power supply.
Using SqueezeBoxServer (LMS) 7.8
piCorePlayer
------------------------------------------------------------------------
mudlark's Profile: http://forums.slimdevices.com/member.php?userid=7151
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[Michael Herger]

Post by mudlark
My machine is 32 bit. Does this mean I need to install a 64 bit version
or is there a work round?

Is your machine 32 bit or did you install 32-bit on your otherwise
64-bit capable machine?

You could most likely build all dependencies yourself... but it can be a
bit involved....

[mudlark]

Post by Michael Herger

Post by mudlark
My machine is 32 bit. Does this mean I need to install a 64 bit

version

Post by mudlark
or is there a work round?

Is your machine 32 bit or did you install 32-bit on your otherwise
64-bit capable machine?
You could most likely build all dependencies yourself... but it can be a
bit involved....
--
Michael

Hi Michael,

When I first installed kubuntu we were advised to install the 32bit
version. My machine is intel core2 so I will try a live install of
kubuntu 14.04 when it's released and reinstall all my data.....I hate
doing this but it's going to have to be done sometime. I might as well
start now. I've looked at an update to the kernel then reinstalling 64
bit and that task would probably be beyond my abilities. My main server
is on 12.04 LTS so that can stay there for a while...

Thanks for the information.

Mike.



Transporter or Cyrus streamX>CyrusDACX>PreXvs>ESPAudio P09B Active
filter>Cyrus X x 2>Rhapsody, Avondale and Naim cable, Kubuntu 12.04
server, various boxes for storage.
SB3 Flycatcher 3A linear power supply.
Using SqueezeBoxServer (LMS) 7.8
piCorePlayer
------------------------------------------------------------------------
mudlark's Profile: http://forums.slimdevices.com/member.php?userid=7151
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[raven22]

Post by Michael Herger
32-bit mode
currently is not supported.
--
Michael

Will it be supported in the (near) future?



Setup: 1 Touch, 4 Booms and 1 Radio.
Server: LMS 7.8 (DebianVM in Proxmox), Tonido for webbased playback
------------------------------------------------------------------------
raven22's Profile: http://forums.slimdevices.com/member.php?userid=16511
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[Michael Herger]

Post by raven22

Post by Michael Herger
32-bit mode
currently is not supported.

Will it be supported in the (near) future?

I didn't have plans to do so... but oh well. Please give this file a try:

http://downloads.slimdevices.com/LogitechMediaServer_v7.8.0rc/logitechmediaserver_7.8.0~1395409907_all.deb

[mudlark]

Michael,

It works. Thanks.

Your reward will be in heaven.

Mike



Transporter or Cyrus streamX>CyrusDACX>PreXvs>ESPAudio P09B Active
filter>Cyrus X x 2>Rhapsody, Avondale and Naim cable, Kubuntu 12.04
server, various boxes for storage.
SB3 Flycatcher 3A linear power supply.
Using SqueezeBoxServer (LMS) 7.8
piCorePlayer
------------------------------------------------------------------------
mudlark's Profile: http://forums.slimdevices.com/member.php?userid=7151
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[raven22]

Post by Michael Herger
Michael

Works on debian jessie as well, thanks



Setup: 1 Touch, 4 Booms and 1 Radio.
Server: LMS 7.8 (DebianVM in Proxmox), Tonido for webbased playback
------------------------------------------------------------------------
raven22's Profile: http://forums.slimdevices.com/member.php?userid=16511
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[martinlittle]

Thank you! Virtual pint sent your way. My weekend is made.


------------------------------------------------------------------------
martinlittle's Profile: http://forums.slimdevices.com/member.php?userid=35518
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[SlimChances]

Did a quick test of the latest LMS nightly on 14.04 Final Beta 64 bit
and it worked fine. I was only able to test it on one song which I
downloaded for the test as my libraries were unaccessible due to
permission issues



Logitech Media Server Version: 7.8.0 - 1386246861 @ Fri Dec 6 19:06:27
PST 2013
Operating system: Debian - EN - utf8
Platform Architecture: x86_64-linux
Perl Version: 5.14.2 - x86_64-linux-gnu-thread-multi
Database Version: DBD::SQLite 1.34_01 (sqlite 3.7.7.1)
One SB Touch connected by ethernet - Denon AVR -1912 Receiver, Paradigm
4.1 speakers
One SB Boom wireless
One SB Radio wireless
------------------------------------------------------------------------
SlimChances's Profile: http://forums.slimdevices.com/member.php?userid=165
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[jimwillsher]

Once again, Michael saves the day! I've installed Ubuntu 14.04 x64 today
as a VM, replacing my 12.04 x64 VM. After installing LMS via apt and
getting the dreaded "restarting" message, I found this thread.

I've downloaded 7.8 from
http://downloads.slimdevices.com/LogitechMediaServer_v7.8.0/, installed
it, and all is working.

Thank you Michael. I know that logitech has stopped the LMS products but
lots of us have many slim players and would be lost without them, and
with your time and hard work we can continue to enjoy them.

A big thank you from me.


Jim


------------------------------------------------------------------------
jimwillsher's Profile: http://forums.slimdevices.com/member.php?userid=410
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[lesel]

Built under linux
Compiled at Mar 27 2014 19:04:38
@INC:
/etc/perl
/usr/local/lib/perl/5.18.2
/usr/local/share/perl/5.18.2
/usr/lib/perl5
/usr/share/perl5
/usr/lib/perl/5.18
/usr/share/perl/5.18
/usr/local/lib/site_perl
------------------
The following modules failed to load on the first attempt: [DBI, EV,
HTML::Parser, JSON::XS, Digest::SHA1, YAML::XS] - will try again.
----------------
The following modules failed to load: DBI EV HTML::Parser JSON::XS
Digest::SHA1 YAML::XS


*******

NOTE:

If you're running some unsupported Linux/Unix platform, please use the
buildme.sh
script located here:
//github.com/Logitech/slimserver-vendor/tree/public/7.8/CPAN

If 7.8 is outdated by the time you read this, Replace "7.8" with the
major version
You should never need to do this if you're on Windows or Mac OSX. If the
installers
don't work for you, ask for help and/or report a bug.
----------------------
can i fix this by using the buildme.sh ? or do I need 32 - bit
version

Thanks


------------------------------------------------------------------------
lesel's Profile: http://forums.slimdevices.com/member.php?userid=62828
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[Michael Herger]

Post by lesel
can i fix this by using the buildme.sh ?

That would be possible, sure.

Post by lesel
or do I need 32 - bit
version

Can't tell you unless you tell us what Linux you're running :-). Give
the latest 7.8.1 nightly a try. It comes with 32-bit support.

[lesel]

Linux lubuntu Kernel 3.13.0-24-powerpc-smp #46-Ubuntu SMP
Ubuntu 14.04 LTS
32-bit version
installed 7.8.1 and used command squeezeboxserver --d_startup
result attached.
Everything was working until upgrade Lubuntu to Ubuntu 14.04 LTS

Thank You

Post by Michael Herger

Post by lesel
can i fix this by using the buildme.sh ?

That would be possible, sure.

Post by lesel
or do I need 32 - bit
version

Can't tell you unless you tell us what Linux you're running :-). Give
the latest 7.8.1 nightly a try. It comes with 32-bit support.
--
Michael

+-------------------------------------------------------------------+
|Filename: squeezeboxserver.txt |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=15835|
+-------------------------------------------------------------------+

------------------------------------------------------------------------
lesel's Profile: http://forums.slimdevices.com/member.php?userid=62828
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[Michael Herger]

Post by lesel
Linux lubuntu Kernel 3.13.0-24-powerpc-smp #46-Ubuntu SMP

Oh, PPC? There are no binaries for recent Linux on PPC... Your best bet
is to clone https://github.com/Logitech/slimserver-vendor/ and run
CPAN/buildme.sh.

What kind of machine are you running this on?

[lesel]

-Computer- Power Macintosh G4
Processor : PowerPC 7455, altivec supported (1.20MHz)
Memory : 1023MB (398MB used)
Operating System : Ubuntu 14.04 LTS

Thanks for the Reply, do you need more info ?

Post by Michael Herger

Post by lesel
Linux lubuntu Kernel 3.13.0-24-powerpc-smp #46-Ubuntu SMP

Oh, PPC? There are no binaries for recent Linux on PPC... Your best bet
is to clone https://github.com/Logitech/slimserver-vendor/ and run
CPAN/buildme.sh.
What kind of machine are you running this on?
--
Michael

------------------------------------------------------------------------
lesel's Profile: http://forums.slimdevices.com/member.php?userid=62828
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[lesel]

Thanks Michael,
OK so I cloned https://github.com/Logitech/slimserver-vendor/
(http://machiine.com/2013/pulling-a-git-repo-from-github-to-your-ubuntu-server/)
cd into https://github.com/Logitech/slimserver-vendor/ and run
CPAN/buildme.sh.
Do I need any build variables after run buildme.sh ?
and can I use the latest 7.9 logitechmediaserver build then run
buildme.sh ?

Post by Michael Herger

Post by lesel
Linux lubuntu Kernel 3.13.0-24-powerpc-smp #46-Ubuntu SMP

Oh, PPC? There are no binaries for recent Linux on PPC... Your best bet
is to clone https://github.com/Logitech/slimserver-vendor/ and run
CPAN/buildme.sh.
What kind of machine are you running this on?
--
Michael

------------------------------------------------------------------------
lesel's Profile: http://forums.slimdevices.com/member.php?userid=62828
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[lesel]

I get this error at end of build

Using BerkeleyDB libdb from
/home/lee/slimserver-vendor/CPAN/build/include
Checking if your kit is complete...
Looks good
WARNING: Setting ABSTRACT via file 'lib/Media/Scan.pm' failed
at /usr/share/perl/5.18/ExtUtils/MakeMaker.pm line 611.
Warning (mostly harmless): No library found for -lintl
Writing Makefile for Media::Scan
Writing MYMETA.yml and MYMETA.json
cp lib/Media/Scan.pm blib/lib/Media/Scan.pm
cp lib/Media/Scan/Error.pm blib/lib/Media/Scan/Error.pm
cp lib/Media/Scan/Progress.pm blib/lib/Media/Scan/Progress.pm
cp lib/Media/Scan/Audio.pm blib/lib/Media/Scan/Audio.pm
cp lib/Media/Scan/Result.pm blib/lib/Media/Scan/Result.pm
cp lib/Media/Scan/Video.pm blib/lib/Media/Scan/Video.pm
cp lib/Media/Scan/Image.pm blib/lib/Media/Scan/Image.pm
make: *** No rule to make target
`/home/lee/slimserver-vendor/CPAN/build/include/../lib/libungif.a',
needed by `subdirs'. Stop.
make failed, aborting

how do I make target?
Thanks Again.

Post by lesel
Thanks Michael,
OK so I cloned https://github.com/Logitech/slimserver-vendor/
(http://machiine.com/2013/pulling-a-git-repo-from-github-to-your-ubuntu-server/)
cd into https://github.com/Logitech/slimserver-vendor/ and run
CPAN/buildme.sh.
Do I need any build variables after run buildme.sh ?
and can I use the latest 7.9 logitechmediaserver build then run
buildme.sh ?

------------------------------------------------------------------------
lesel's Profile: http://forums.slimdevices.com/member.php?userid=62828
View this thread: http://forums.slimdevices.com/showthread.php?t=101147

[Michael Herger]

Post by lesel
make: *** No rule to make target
`/home/lee/slimserver-vendor/CPAN/build/include/../lib/libungif.a',
needed by `subdirs'. Stop.
make failed, aborting

Make sure you have libgif installed on your system.

[pablolie]

over the weekend, i will migrate my current virtual machine
12.04+LMS7.7.3 (i run it off Windows VMware Workstation) to 1.404 to
future proof my SB infrastructure for many more years :) this thread has
probably armed me with the tools to do so easily. i love running LMS on
a dedicated VM on my home server, by the way. Allows me to switch it
between machines, upgrades and always go back to a configuration that
works. And will stay now running semi-supported for many years with
14.04 LMS. long live the SB! :)

PS: I have calculated that to migrate (not upgrade) what i have to Sonos
I'd have to spend over $3k. for *no* gain in sound quality. so i am
*happy* we can keep pushing the life expectancy of a concept i prefer
anyhow :) on occasions like this, Logitech's decision still amazes me
:-P



...pablo
Server: Virtual Machine running Ubuntu 12.04 + LMS 7.7.3 on VMware
Player
System: SB Touch --optical->- Benchmark DAC2HGC --AnalysisPlus Oval
Copper XLR->- Creek Destiny Power Amp --AnalysisPlus Black Mesh Oval->-
KEF LS50
Other Rooms: 2x SB Boom; 1x SB Radio; 1x SB Classic-> AudioEngine5
------------------------------------------------------------------------
pablolie's Profile: http://forums.slimdevices.com/member.php?userid=3816
View this thread: http://forums.slimdevices.com/showthread.php?t=101147